banner
banner
banner
banner
Shanghai Diesel Engine Electronic Accelerator PedalD100X-007-800+B Pedal Valve

Shanghai Diesel Engine Electronic Accelerator PedalD100X-007-800+B Pedal Valve

Short Description:

Electronic device throttle pedal used in electronic device throttle automatic control system, the basic principle is according to the pedal position sensor will throttle requirements data signal into current data signal sent to the ECU, ECU integrated current speed, vehicle distance judgment, throttle opening, car speed and other information, calculate the best throttle opening. The ECU controls the output torque of the brushless DC motor to continuously adjust the throttle opening of the electronic device. The throttle position sensor reports the data signal of the throttle position to the ECU to generate a closed-loop control system, and finally makes the throttle of the electronic device stable to the best opening.

Product Detail

Product Tags

Parameter
D100x-007-800 +B Electronic accelerator pedal D100X-007-801+A electronic accelerator pedal D100X-007-801+B Electronic accelerator pedal D100X-007-802+A electronic accelerator pedal D100X-007-802+B electronic accelerator pedal D100X-007- 803+B electronic gas pedal D88A-007-800+A electronic gas pedal D88A-007-800+C electronic gas pedal S00006195+01 Electronic gas pedal T88-057-04+A electronic gas pedal (45°)T88-057-05+A electronic gas pedal (35°) )
110502818 Foot valve installation assembly 110503153 Foot valve installation assembly 110504233 Foot valve installation assembly
110900267 Foot valve installation assembly 110901020 Foot valve installation assembly 112106050 Foot valve installation assembly
114002187 Foot valve installation assembly 127102070 Foot valve installation assembly 127200145 Foot valve installation assembly 803000322 Foot valve
Applicable models
QY25K5C_2 QY70KC QY50KC QY25K5D_2 QY25KC  XCT35_BR  QY25K5D_3 QY25K5D_3 QY25K5C_1  QY55KC_1 QY25K5F_1 QY50KC QY50K5C_1  QY25K5C_2 QY25K5F QY25K5C QY25K5D_2 QY30KC QY55K5C_2    QY25K5F_1 QY25K5D_1 QY30KC QY55K5D
XCT80L6 XCT130_1  XCT12  XCT80L6  XCT25L4_S  XCA40_M  XCA30_JY  XCT25L5_3  XCT55L5  XCT110_1  XCT60L6  XCT12  XCT25L5_SR    XCT25L5_2  XCT95L7  XCT75L7  QY110K8C  QY95K7C  QY110K7C  XCT100  XCT75_S  QY40KC  XCT90  XCT25  XCT25L5_E  QY70KC   QY40K5C_2  XCT60L6_1  QY75KC  QY100K7C  QY95KH  QY100K6C  QY50JW  XCT16_1  XCT100_BR  XCT60  QY20K5D  QY85KC  XCT25   XCT80L5  XCT100  XCT20L5_1  XCT75L6  XCT20L5  XCT80_S  XPD36  QY16KC  QY16KC  QY40K5D_1  QY25K5L  XCA40  QY40KD  QY80K5D QY70K5D_1 QY50KD QY20K5C XCT50_Y XCT16_Y XCT25L4_Y XCT80_Y XCT60_Y XCT50_Y and other XCT QY RT series models
Product introduction
The gas pedal sensor is installed inside the gas pedal to monitor the position of the foot pedal. When the accelerator pedal sensor detects a shift in the aspect ratio of the accelerator pedal, it will send the information to the ECU, which calculates and solves the data information transmitted by this information and other system software, calculates a control data signal, and sends it to the servo motor motor vehicle relay according to the route.
If the accelerator pedal sensor has a common fault, the fault indicator will flash, and the ECU will not be able to recognize the throttle size, which will cause the vehicle to idle jitter, throttle stagnation, no oil response or loss of driving force. At this time, the maintenance should be completed immediately, remove the throttle total, find the signal output line matched by the sensor, apply the digital multimeter resistance file to accurately measure the route, turn the pedal, observe the change of the instrument marker value, and distinguish whether there is a common fault. Check whether there is a short circuit or a connector falling off the sensor harness. If it is damaged, replace it immediately.
  • Previous:
  • Next:

    • Products categories